starting to install the interior, installed the front suspension. put the motor in. uuc 8lb flywheel, m5 clutch, abs had to move order to clear he supercharger. tree house racing brake booster installed, lcab tree house racing, harness modified by matt @ racer's market ( matt on R3vlimted.com). trying to figure out where to mount the radiator fan. most likely I would have to move out the condenser to mount a fan in between the condenser and radiator. motor mount arm on the right ( passenger side ) would need to be flipped upside down. left side would fit the same. Ran spacer on both side about 1/4 in. ABS sensor in the front fit right in but the rear abs sensor would require spacers. When installing the motor and tranny remember to line up the motor before you tighten down on the tranny. UUC stainless clutch line installed. installed the 98 E36 m3 rack and the knuckle was modified by Robert (RobertK ) on R3vlimited. things are coming along ok. had to relocated somethings but getting there slowly.

ok finally some progress. Installed the differential, cv axle with new boot, ground control coilover, koni shocks

I only adjusted the rear coilover half way down of what I can adjust. I want it to be right at the tire. 2.93lsd with redline. Also installed 4 stainless steel line in the rear so there is 2 left for the front. Still waiting for some more stuff. modified knuckle ( w/ aluminum bushing ) to the steering rack ( 98 M3 ), RMS supercharger Stage 2 +++, rear caliper rebuild kit, A/C compressor, modified A/c lines, treehouse racing brake booster and cab. Hoping to finish next weekend and go for a drive. Wheels on there are from a 04 325ci sport package 17x8 225/45. Don't know if I want to go bigger or not. Having a problem with the ABS pulse sensor but hopefully sort it out. If not bye bye ABS. Also replace both rear wheel bearing as they were shot.

ground control coil overs came in. e36 m3 strut for e30 chassis, 440lb front and 700lb rear

A lot of parts have came in that was ordered, all hoses, ebrake pads, cv axles boot kit, brake lines, ect.. to much to list . installed

Also installed IE green subframe bushing and IE street trailing arm bushing. More parts are coming in like GC coilover kit for E36 hub on E30 chassis, treehouse racing parts, RMS stage 2 ++ supercharger kit and other stuff.

pictures of the crack dash, test fitted the perfect dash, remove carpet, climate control box, pics sub frame drop, trailing arm removed, 325ci wheel