starting to install the interior, installed the front suspension. put the motor in. uuc 8lb flywheel, m5 clutch, abs had to move order to clear he supercharger. tree house racing brake booster installed, lcab tree house racing, harness modified by matt @ racer's market ( matt on R3vlimted.com). trying to figure out where to mount the radiator fan. most likely I would have to move out the condenser to mount a fan in between the condenser and radiator. motor mount arm on the right ( passenger side ) would need to be flipped upside down. left side would fit the same. Ran spacer on both side about 1/4 in. ABS sensor in the front fit right in but the rear abs sensor would require spacers. When installing the motor and tranny remember to line up the motor before you tighten down on the tranny. UUC stainless clutch line installed. installed the 98 E36 m3 rack and the knuckle was modified by Robert (RobertK ) on R3vlimited. things are coming along ok. had to relocated somethings but getting there slowly.